Aspen Alarm Systems Inc.

Alarm Panels

  • Listed to UL standard 864, 9th edition.
  • Remote site or local USB port upload/download, using PSTools.
  • Up to 6.0 amps total NAC power when using optional XRM-24B
  • Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices.
  • Remote Acknowledge, Silence, Reset and Drill via addressable monitor modules or LCD-80F, ANN-80 or ACS Annunciators.
  • EIA-232 printer/PC interface (variable baud rate) on main
  • circuit board, for use with optional UL-listed printer PRN-6F.
  • Integral 80-character LCD display with backlighting.
  • Real-time clock/calendar with automatic daylight savings
  • control.
  • Detector sensitivity test capability
  • History file with 1,000-event capacity.
  • Maintenance alert warns when smoke detector dust accumulation
  • is excessive.
  • Automatic device type-code verification.
  • One person audible or silent walk test with walk-test log and
  • printout.
  • Point trouble identification.

Pull Stations

  • Aesthetically pleasing, highly visible design and color.
  • Attractive contoured shape and light textured finish.
  • Meets ADA 5 lb. maximum pull-force.
  • Easily operated(single- or dual-action), yet designed to prevent false alarms when bumped, shaken, or jarred.
  • PUSH IN/PULL DOWN handle latches in the down position to
  • clearly indicate the station has been operated.
  • The word "ACTIVATED" appears on top of the handle in
  • bright yellow, further indicating operation of the station.
  • Operation handle features white arrows showing basic operation
  • direction for non-English-speaking persons.
  • Braille text included on finger-hold area of operation handle
  • and across top of handle.
  • Station can be opened for inspection and maintenance without
  • initiating an alarm.
  • Can be surface-mounted (with SB-10 or SB-I/O) or semiflush
  • mounted. Semi-flush mount to a standard single-gang,
  • double-gang, or 4" (10.16 cm) square electrical box.
  • Spanish versions (FUEGO) available (BG-12LSP, BG-12LPSP).

Detectors

  • Plug-in detector line, mounting base included
  • Large wire entry port
  • Mounts to octagonal and single-gang back boxes, 4-square back boxes, or direct to ceiling
  • Removable detector cover and chamber
  • Built-in remote maintenance signaling
  • Drift compensation and smoothing algorithms
  • Simplified sensitivity measurement
  • Built-in test switch
  • RealTest™ technology allows installer to test detector with CO gas
  • Full compliance with UL 2075
  • Electrochemical Sensing Technology
  • Local Sounder
  • LED Status Indicators
  • Test/Hush Button
  • Tamper Resistant

Heat Detectors

Multiple configurations for installations:
  • Single- and dual-circuit models
  • Fixed temp and combination fixed- temp/rate-of-rise
  • 135°F or 194°F ratings.
  • A broad range of back box mounting options:
  • Single gang
  • 3.5˝ and 4˝ Octagonal
  • 4˝ square with square to round plaster ring
  • Reversible mounting bracket
  • ISO-9001 Certified
  • Trips at 135 degrees or when the temperature rises 15 degrees or more per minute
  • Contains built in transmitter

Strobes and Horn Strobes

  • Plug-in design with minimal intrusion into the back box
  • Tamper-resistant construction
  • Automatic selection of 12- or 24-volt operation at 15 & 15/75 candela
  • Field-selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, & 185
  • Horn rated at 88+ dBA at 16 volts
  • Rotary switch for horn tone and three volume selections
  • Universal mounting plate for wall and ceiling units
  • Mounting plate shorting spring checks wiring continuity before
  • device installation
  • Electrically compatible with existing SpectrAlert products
  • Compatible with MDL sync module
  • 12 and 24V operation
  • High and low volume settings
  • Temporal and non-temporal tones
  • Mounts to single gang back box
  • Compatible with MDL sync module
  • Mechanically and electrically compatible with PA400 series
  • Mini-Alert (TM) sounders

  • Plug-in design with minimal intrusion into the back box
  • Tamper-resistant construction
  • Automatic selection of 12- or 24-volt operation at 15 &15/75 candela
  • Field-selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, &185
  • Horn rated at 88+ dBA at 16 volts
  • Rotary switch for horn tone and three volume selections
  • Universal mounting plate for wall and ceiling units
  • Mounting plate shorting spring checks wiring continuity before
  • device installation
  • Electrically compatible with existing SpectrAlert products
  • Compatible with MDL sync module